SMMA1031
Sold Out
The SMMA1031 is constructed primarily from mild steel and is integrated with innovative counterbalance gas spring technology. It is designed to hold two monitors side by side which can the be moved easily due to the gas sprung arm. The arm can hold two monitor screens up to 7kgs (17.6lbs) each. The built-in gas spring can be easily be adjusted to take varied weights that the arm holds. The monitors can easily slide on the cross-arm to position them side by side. They are attached using VESA compatible plates. A hidden cable management integrated in arm easily conceals cables beneath channel covers.
 |
Data Sheet |  |
Installation Manual |
| Cable Management | Included |
| Screen rotation | 360 Degrees |
| Swivel | 180 degrees |
| Tilt | +/- 10 degrees |
| Height adjustment | 265mm - 595mm |
| Max per monitor weight | 7Kg (17.6lbs) |
| Monitor size | 17 inches - 32 inches |
| VESA size | 100x100 and 75x75mm |
| Fitting | Clamp on and through desk grommet |
| Number of monitors | 2 |
| Curved monitor | Yes. Can be fitted. |
** - If you have a curved monitor and it has a non-flat (or cage) VESA adapter then you may need to buy a higher capacity arm as the torque load on the screen tilt may be beyond the rating. Our monitor arms are designed with for screens with a centre of gravity less than 20mm from the VESA plate.
Call us on 04890767076 - Click here for discount codes! 
